Gold Member Since 2010
Audited Supplier
Zhengzhou Smile Dental Equipment Co., Ltd.

Air Dryer for Dental Air Compressor, Dental Equipment, Oilfree Air Compressor manufacturer / supplier in China, offering Air Dryer for Dental Air Compressor, 120PCS Dental Titanium Auro Post, Stainless Steel Dental Screw Post and so on.

(/ )

Supplier Homepage Product Dental Power Systems Accessories Air Dryer for Dental Air Compressor

Air Dryer for Dental Air Compressor

Purchase Qty.:
(Pieces)
1-4 5+
FOB Unit Price: US $300 US $200
Purchase Qty. (Pieces) FOB Unit Price
1-4 US $300
5+ US $200
Get Latest Price
Transport Package: Carton
Payment Terms: T/T, Western Union
Basic Info
  • Model NO.: SDT-AC51
  • Material: Metal
  • Medical Device Regulatory Type: Type 1
  • Usage: Making The Using Air Dry and Clean
  • Specification: 1set/pack
  • Applicable Departments: Oral Surgery
  • Medical Devices Ad. Approval No.: Ssyjxzz-2013-2550080
  • Fitting for: AC11/AC12/AC31/AC32
  • Trademark: Dynamic
  • Origin: China
Product Description
Air Dryer for Dental Air Compressor

Air Dryer for Dental Air Compressor
 
Air Dryer For AC11/AC12/AC31/AC32  AC51 


Compact Heatless Regenerative Air Dryers:
The requirement for clean, dry compressed air for today's manufacturing and processing methods is more critical than ever. Moisture and particulate matter are found in all compressed air systems. These contaminants cause rust and corrosion damaging and increasing downtime of pneumatic tools, controls, and instrumentation. When applications require better dew points than can be achieved with refrigerated air dryers (35° F to 39° F) a heatless regenerative desiccant dryer should be utilized. -40° F to -100° F (-40° C to -73° C). At one time, compressed air dryers were luxuries. Today, as maintenance costs continue to rise, and the need for increased productivity grows, they're a necessity in nearly every process where compressed air is used. The HY air dryer, together with its associated filters, is a key part of a well-engineered compressed air system. HY, an industry leader in the design and manufacture of innovative compressed air products, has developed the GXW Series -40° F to -100° F (-40° C to -73° C) pressure dew point Heatless Regenerative Desiccant Dryer to meet the ever-increasing demand for efficient and economical ultra dry compressed air. Our Compact Regenerative Pressure Swing Heatless Air Dryers, together with a broad range of high-efficiency filters, can provide total air treatment with outstanding reliability and performance for your compressed air applications.

Features and Benefits
@Compact, modular design with few moving parts for long term reliability.
@ Automatic regenerative operation and no regular maintenance required.
@ Available in multiple voltages. Low power consumption.
@ PLC cycle timer for reliable purge cycle timing.
@ Desiccant chambers are spring-loaded for long life and optimum performance.
@ Purge mufflers are standard for quiet operation.
@ Space-saving wall-mount bracket is standard.
@ Repressurizing timer for minimal downstream flow and pressure fluctuation during tower switch over.
@ Easy change when different purge flows are required.
@ The total cycle time may be choosed by one, two, five or ten minutes.
@ All material is stainless steel.
@ Designed to accommodate optional system components and dryer accessories without modification.

Dryer Operation
The heatless air dryers utilize two symmetrical desiccant towers. The wet air enters the dryer and flows through one of the towers where nearly all the water vapor is adsorbed. In the flow schematics shown below, the right tower is being regenerated while the left tower is drying the wet inlet air. Inlet air flow direction is controlled by the solenoid valves. As shown below, Valve B is open and valve A is closed, which allows the inlet shuttle valve to direct the air to the left tower. A portion of the dry air is allowed to flow through an purge flow adjusting valve into the right tower. The dry air flowing through the adjusting valve expands to nearly atmospheric pressure, which dries the purge air still more. This very dry air extracts the water from the desiccant as it flows through the right tower and out the solenoid valve exhaust port. The adjusting valve are fixed and are sized by the factory, based on flow and pressure. A elecrical timer controls the cycling of the solenoid valves. After a set period of time, the procedure is reversed. The wet left tower is being regenerated, while the right tower is drying the wet inlet air. During each cycle, the desiccant towers are either drying the wet inlet air or being reactivated with dry air from the drying tower. The total cycle time may be choosed by one, two, five or ten minutes.


Why Smile Dental?
 
1. Professional
 8 years special in Dentistry
 
2. Supply Range
 From equipment to materials
 Form disposables to consumables
 For dental clinic and dental laboratory
 We offer almost all kinds of dental products.
 
3. Quality
 From world's top brands
 And wise choices of Chinese manufacturers based on 8 years' experience
 Full certifications as ISO, CE, FDA
 We never forget our positioning.
 
4. Service
 Long-term & stable warranty
 OEM
 
5. Shipping
With 100+ countries' transportation experience
With 3000+ KG monthly shipment amount via express courier
With 360+ CBM yearly shipment amount by sea
With professional & skilled transport operations
We deliver a smooth shipping and logistics experience at competitive cost.
 
6. Price
  Cost-effective product + service
  Discount for bulky order
 
We stock leading brands as following:
 3M-ESPE,GC,DENSPLY,EMS,NSK,MANI,DMG,HERAEUS,ZHERMACK,Kerr,VACO,KODAK,SINOL,SEASHIN,VISODENT,GAPENT,WOODPECKER,SUNTEM,DENJOY,COXO,AIXIN,DYNAIR,RUNYES,GETIDY,YINYA,ORJ…
 
Product Groups
Send your message to this supplier
Avatar
Ms. Sara
*From:
To: Ms. Sara
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now